I lost the settings (username, password, IP address, etc.) I set in the WebReboot, now what should I do?

The factory reset is used to restore the factory default IP address, username, and password of the WebReboot.

1. Remove the power and Ethernet cables from the WebReboot.
2. Locate the factory reset button on the bottom of the WebReboot.
3. While pressing and holding the reset button, plug the power cable into theWebReboot.
4. The yellow status LED on the front of the case will stay on for four seconds. Do notrelease the reset button until the status LED turns completely off.
5. Reconnect the Ethernet cable, and connect to your WebReboot at the factoryprogrammed IP address, username, and password.

Back to FAQ list